| 信号检测与处理实验平台的USB通信接口设计 |
| |
| 引用本文： | 单开,黄云志,王海欣,徐科军. 信号检测与处理实验平台的USB通信接口设计[J]. 工业仪表与自动化装置, 2011, 0(3): 28-31 |
| |
| 作者姓名： | 单开 黄云志 王海欣 徐科军 |
| |
| 作者单位： | 合肥工业大学电气与自动化工程学院,合肥,230009 |
| |
| 基金项目： | 安徽省高等学校省级教学研究项目"信号检测、处理及实现"系列课程理论和实践教学改革研究，安徽省"信号检测、处理及实现"系列课程教学团队资助 |
| |
| 摘 要： | 通用串行总线(USB)具有即插即用、扩展方便和传输速度快等优点.为了实现方便快速的数据采集与实时控制,在基于DSP的信号检测与处理实验平台上设计以ISP1581为接口芯片的USB通信接口.设计了硬件电路,并编写了固件程序、应用程序、驱动程序以及上位机软件.测试结果表明,实验平台通过USB接口实现了传感器数据采集与电机控...
|
| 关 键 词： | USB DSP 固件 数据采集 实时控制 |
Design of USB interface for signal measurement and processing experimental platform |
| |
| SHAN Kai,HUANG Yunzhi,WANG Haixin,XU Kejun. Design of USB interface for signal measurement and processing experimental platform[J]. Industrial Instrumentation & Automation, 2011, 0(3): 28-31 |
| |
| Authors: | SHAN Kai HUANG Yunzhi WANG Haixin XU Kejun |
| |
| Affiliation: | (School of Electrical Engineering and Automation,Hefei University of Technology,Hefei 230009,China) |
| |
| Abstract: | Universal Serial Bus（USB） has many advantages such as plug and play,easy extensibility and high data rate.In order to achieve fast data acquisition and real-time control,the USB interface based on ISP1581 has been designed for signal measurement and processing experimental platform.The hardware circuit is designed.The firmware,the application program,the driver program and the host computer are developed.Experiment results show that the platform implements the data acquisition and real-time motor control via USB interface with high speed and better stability. |
| |
| Keywords: | USB DSP firmware data acquisition real-time control |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
