High-Q Microwave Dielectrics in the (Mg1−xCox)2TiO4 Ceramics |
| |
Authors: | Cheng-Liang Huang Jhih-Yong Chen |
| |
Affiliation: | Department of Electrical Engineering, National Cheng Kung University, Tainan 70101, Taiwan |
| |
Abstract: | The microwave dielectric properties and the microstructures of (Mg1− x Co x )2TiO4 ceramics prepared by the conventional solid-state route were investigated. Lattice parameters were also measured for specimens with different x . The formation of solid solution (Mg1− x Co x )2TiO4 ( x =0.02–0.1) was confirmed by the X-ray diffraction patterns, energy dispersive X-ray analysis, and the lattice parameters measured. By increasing x from 0 to 0.05, the Q × f of the specimen can be tremendously boosted from 150 000 GHz to a maximum of 286 000 GHz. A fine combination of microwave dielectric properties (ɛr∼15.7, Q × f ∼286 000 GHz at 10.4 GHz, τf∼−52.5 ppm/°C) was achieved for (Mg0.95Co0.05)2TiO4 ceramics sintered at 1390°C for 4 h. Ilmenite-structured (Mg0.95Co0.05)TiO3 was detected as a second phase. The presence of the second phase would cause no significant variation in the dielectric properties of the specimen because it possesses compatible properties compared with that of the main phase. In addition, only a small deviation in the dielectric properties was monitored for specimens with x =0.04–0.05 at 1360°–1420°C. It not only provides a wide process window but also ensures an extremely reliable material proposed as a very promising dielectric for low-loss microwave and millimeter wave applications. |
| |
Keywords: | |
|
|