| 矿井安全监控系统内接触点式馈电传感器的研究与应用 |
| |
| 引用本文： | 刘辉,傅廷波,曹利明.矿井安全监控系统内接触点式馈电传感器的研究与应用[J].山东煤炭科技,2021,39(1):145-146,148,151. |
| |
| 作者姓名： | 刘辉 傅廷波 曹利明 |
| |
| 作者单位： | 山东许厂煤矿有限公司,山东济宁272113;山东许厂煤矿有限公司,山东济宁272113;山东许厂煤矿有限公司,山东济宁272113 |
| |
| 摘 要： | 为了解决监控系统传统馈电传感器监测不准确问题,通过在馈电闭锁开关中加装延时继电器与交流接触器,并引接出一组无源端子开关信号,将该开关信号接入矿井安全监控系统。闭锁馈电开关的送电与停电控制交流接触器的吸合与断开触发无源端子触点动作,输出开与关的电信号并上传到安全监控系统,可以准确地监控到闭锁馈电开关的送电与停电状态。
|
| 关 键 词： | 安全监控系统 馈电传感器 研究应用 |
Research and Application of Contact Point Feed Sensor in Mine Safety Monitoring System |
| |
| Liu Hui,Fu Tingbo,Cao Liming.Research and Application of Contact Point Feed Sensor in Mine Safety Monitoring System[J].Shandong Coal Science and Technology,2021,39(1):145-146,148,151. |
| |
| Authors: | Liu Hui Fu Tingbo Cao Liming |
| |
| Affiliation: | (Shandong Xuchang Coal Mine Co.,Ltd.,Shandong Jining 272113) |
| |
| Abstract: | In order to solve the problem of inaccurate monitoring of traditional feed sensor in monitoring system,a group of passive terminal switch signals are connected by adding delay relay and AC contactor to the feed locking switch.The switch signal is connected to the mine safety monitoring system.The power transmission and blackout of the latch feed switch control AC contactor suction and disconnect trigger passive terminal contact action,output the electric signal on and off and upload to the safety monitoring system.The power transmission and power failure state of the latch feed switch can be accurately monitored. |
| |
| Keywords: | security monitoring system feed sensor research and application |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
