| 采煤机截割部齿轮受力及疲劳寿命研究 |
| |
| 引用本文： | 车建伟,刘波,侯松青,李玮. 采煤机截割部齿轮受力及疲劳寿命研究[J]. 煤矿机械, 2021, 42(1): 128-131 |
| |
| 作者姓名： | 车建伟 刘波 侯松青 李玮 |
| |
| 作者单位： | 中北大学机械工程学院,太原030051 |
| |
| 摘 要： | 以MG300/700-WD型采煤机截割部为研究对象,利用MATLAB编程分析了不同煤层性质和夹矸层高度及位置对截割力的影响。采用ANSYS Workbench软件对截割部高速端齿轮进行动力学分析,利用nCode Design Life软件进行疲劳寿命分析,得到其易于疲劳的位置为两齿轮齿面接触的部位,其寿命为163 d左右,对采煤机预防性维修具有重要意义。
|
| 关 键 词： | 采煤机截割力 瞬态动力学分析 寿命预测 |
Research on Force and Fatigue Life of Shearer Cutting Part Gear |
| |
| Che Jianwei,Liu Bo,Hou Songqing,Li Wei. Research on Force and Fatigue Life of Shearer Cutting Part Gear[J]. Coal Mine Machinery, 2021, 42(1): 128-131 |
| |
| Authors: | Che Jianwei Liu Bo Hou Songqing Li Wei |
| |
| Affiliation: | (School of Mechanical Engineering,North China University,Taiyuan 030051,China) |
| |
| Abstract: | Taking the cutting part of the MG300/700-WD shearer as the research object, used MATLAB programming to analyze the influence of different coal seam properties and the height and position of the gangue layer on the cutting force. The ANSYS Workbench software was used to analyze the dynamics of the high-speed end gears of the cutting part,and the nCode Design Life software was used to analyze the fatigue life. The positions that are prone to fatigue are the location of the contact of two gear tooth surfaces and the life is about 163 days, which is of great significance to the preventive maintenance of the shearer. |
| |
| Keywords: | shearer cutting force transient dynamic analysis life prediction |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
