Spouted bed hydrodynamics in a 0.91 m diameter vessel

Hydrodynamic measurements were obtained in a flat-based half-cylindrical column of diameter 0.91 m and inlet orifice diameters of 76 to 114 mm. Beds of 3.5 to 6.7 mm diameter particles with static depths of 0.53 to 1.83 m were spouted with air. In agreement with measurements by earlier workers in smaller columns, it was found necessary to operate with inlet orifice diameters less than about 30 times the mean particle diameter in order to be able to achieve stable spouting. Correlations for minimum spouting velocity developed on small vessels generally gave poor predictions for the large diameter vessel employed in this work and failed to predict the observed dependence of U_ms on the static bed height. Substantial dead regions where particles were stagnant were observed in the lower outer portion of the vessel. Other aspects of behaviour studied, including spout diameters and shapes, fountain heights, pressure profiles and gas velocities in the annulus, were qualitatively similar to those in smaller columns, although equations developed for the smaller vessels did not always provide accurate predictions.