| Abstract: | An analysis of flow of a power law fluid in a spiral mandrel die is presented. The analysis is applied to study the effect of various die design parameters on the flow distribution at the end of the spiral mandrel section. Three variables that have a very strong effect on the flow distribution are the number of grooves, the initial clearance, and the groove helix angle. The distribution is improved by increasing the number of grooves, by using a non-zero initial clearance, and a relatively small helix angle. Two more variables that have a significant effect on the flow distribution are the taper angle and the initial groove depth. The optimum taper angle was found to be between 1 and 3 degrees. The distribution uniformity improves with the initial groove depth, while the pressure drop reduces at the same time. |
