Carrier-Based Modulation Technique for Matrix Converter

This paper presents a carrier-based modulation method for a matrix converter. By using the offset voltage and changing the slope of carrier, it is possible to synthesize the sinusoidal input currents with the unity power factor and desired output voltages. The proposed method is equivalent to the so called space vector pulsewidth modulation method. The proposed method uses a new point of view to understand the matrix converter modulation method such as the voltage source inverter (VSI) modulation method. Using the proposed method, this paper presents the two-phase/three-phase modulation method and dynamic/steady-state overmodulation method for the matrix converter. These methods are well developed in the study of a VSI. By the proposed steady-state overmodulation method, it is possible to synthesize the fundamental component of output voltage to be equal to that of input voltage at the cost of some distortion of input current. The feasibility of the proposed modulation method has been verified by a computer simulation and experimental results. These results show that the proposed carrier-based modulation method can be implemented easily without any tables. It can be used for the application where a higher voltage transfer ratio is essential