| 基于UG粉末冶金成型模关键零件的智能化设计 |
| |
| 引用本文： | 夏薇,廖小平,苏广才,王保华.基于UG粉末冶金成型模关键零件的智能化设计[J].模具工业,2006,32(3):17-22. |
| |
| 作者姓名： | 夏薇 廖小平 苏广才 王保华 |
| |
| 作者单位： | 广西大学,机械工程学院,广西,南宁,530004 |
| |
| 基金项目： | 广西科学研究与技术开发计划项目 |
| |
| 摘 要： | 介绍基于Unigraphics NX的二次开发特征参数设计思想,针对粉末冶金模具的特点,开发了粉末冶金成型模具CAD软件系统中关键零件的智能化生成模块。还阐述了该系统的总体结构和关键开发技术,并给出了系统运行实例。
|
| 关 键 词： | 粉末冶金模 二次开发 Unigraphics CAD |
| 文章编号： | 1001-2168(2006)03-0017-06 |
| 收稿时间： | 07 22 2005 12:00AM |
| 修稿时间： | 2005年7月22日 |
UG-based Intellectualized Design for the Key Parts of Powder Metallurgy Forming Die |
| |
| XIA Wei,LIAO Xiao-ping,SU Guang-cai,WANG Bao-hua.UG-based Intellectualized Design for the Key Parts of Powder Metallurgy Forming Die[J].Die & Mould Industry,2006,32(3):17-22. |
| |
| Authors: | XIA Wei LIAO Xiao-ping SU Guang-cai WANG Bao-hua |
| |
| Affiliation: | College of Mechanical Engineering, Guangxi University, Nanning, Guangxi 530004, China |
| |
| Abstract: | Design consideration for Unigraphics NX-based secondary development of characteristic parameters was introduced. Intellectualized generation module of key parts of powder metallurgy forming die in CAD software system was developed according to the characteristic of the die. The general structure of the system and the key developing technology was expatiated and the example of system operation was described as well. |
| |
| Keywords: | Unigraphics CAD |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
