| 单颗磨粒磨削钛合金TC4成屑过程仿真研究 |
| |
| 引用本文： | 程泽,徐九华,丁文锋,田霖,杨树宝.单颗磨粒磨削钛合金TC4成屑过程仿真研究[J].金刚石与磨料磨具工程,2011,31(2):17-21. |
| |
| 作者姓名： | 程泽 徐九华 丁文锋 田霖 杨树宝 |
| |
| 作者单位： | 南京航空航天大学机电学院,南京,210016 |
| |
| 基金项目： | 国家重点基础研究发展计划，教育部创新团队计划，教育部新世纪优秀学者支持计划 |
| |
| 摘 要： | 采用有限元模拟技术对钛合金TC4材料的单颗磨粒磨屑形成过程进行了仿真研究.研究表明:钛合金TC4在单颗磨粒磨削过程中发生绝热剪切,形成锯齿状磨屑;磨削过程中单颗磨粒磨削力成周期变化;磨粒负前角增大,锯齿化程度加深;磨削速度提高,磨屑剪切带宽度减小;仿真分析得到的磨屑形态与实验结果相一致.
|
| 关 键 词： | 负前角 本构模型 锯齿磨屑 有限元仿真 |
Simulation of chip formation in grinding titanium alloy TC4 with single abrasive grit |
| |
| Cheng Ze,Xu Jiuhua,Ding Wenfeng,Tian Lin,Yang Shubao.Simulation of chip formation in grinding titanium alloy TC4 with single abrasive grit[J].Diamond & Abrasives Engineering,2011,31(2):17-21. |
| |
| Authors: | Cheng Ze Xu Jiuhua Ding Wenfeng Tian Lin Yang Shubao |
| |
| Affiliation: | Cheng Ze Xu Jiuhua Ding Wenfeng Tian Lin Yang Shubao(College of Mechanical and Electrical Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China) |
| |
| Abstract: | The chip formation of titanium alloy TC4 in grinding with single abrasive grit was investigated based on the finite element simulation.Results showed that adiabatic shear behavior occurred and serrated chips were formed during grinding with single abrasive grit.Grinding force changed periodically accompanying the forming process of serrated chip.As the negative rake angle of the grit increased,the degree of the serration became enhanced.As the cutting speed increased,the width of adiabatic shear band decrea... |
| |
| Keywords: | negative rake angle constitutive model serrated chip finite element simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
