首页 | 本学科首页   官方微博 | 高级检索  
     

TEA CO2激光器工作气体的检测与催化再生
引用本文:王道 田宁宁 郭丽 郭兴盛 翟明 王红. TEA CO2激光器工作气体的检测与催化再生[J]. 激光杂志, 1986, 7(6): 302-305
作者姓名:王道 田宁宁 郭丽 郭兴盛 翟明 王红
作者单位:[1]北京工业大学 [2]电子工业部第十二研究所
摘    要:本文对TS-1000型TEA CO2激光器工作气体成份的变化进行了检测,CO、NOx的浓度随脉冲次数增加而增大,约2000个脉冲后,COo、NOx浓度超于平衡,此时CO2的分解率为12%左右;NOx的浓度为300ppm左右。用催化再生方法消除N0x和CO,取得良好的结果。

关 键 词:CO2激光器 催化再生 TEA 工作气体 检测 NOx浓度 脉冲次数 1000型 气体成份 再生方法
修稿时间:1985-12-19

Detection and catalytic receneration of working gas for TEA CO2 laser
Wang Dao ,Tian NingNing, Guo Li,Guo Xing ,Sheng Zhai Ming, Wang Hong. Detection and catalytic receneration of working gas for TEA CO2 laser[J]. Laser Journal, 1986, 7(6): 302-305
Authors:Wang Dao   Tian NingNing   Guo Li  Guo Xing   Sheng Zhai Ming   Wang Hong
Affiliation:Beijing Polytechnic University;The Twelfth Institute, The Ministry of Electronics Industry
Abstract:The working gas composition of a TS-1000 type TEA CO2 laser was analyzed by using an IR CO analyzer and a spectrophotometer. The concentrations of CO and NO. vary as the pulse increases. After 2000 pulses, CO2 decomposition rate was nearly constant at 12%, or so, NOx concentration, at 300 ppm. Catalytic regeneration was very effective on eliminating CO and NOx.
Keywords:
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号