| 插座注射模设计 |
| |
| 引用本文： | 陈淑玲.插座注射模设计[J].模具制造,2008,8(5):59-61. |
| |
| 作者姓名： | 陈淑玲 |
| |
| 作者单位： | 广东省高级技工学校,广东惠州,516100 |
| |
| 摘 要： | 介绍了插座上、下盖注射模设计与制造方法。该注射模主要零件用Pro／EWildfire3．0进行三维造型，整个模架在Pro／EWildfire3．0装配模块中进行三维造型和装配过程。叙述了在Pro／EWildfire3．0中创建工程图、分模，转为dwg文件格式的方法和步骤。
|
| 关 键 词： | 插座 注射模 Pro/E Wildfire3.0 三维造型 |
Design of Injection Mold for the Plug Lid |
| |
| Chen Shuling.Design of Injection Mold for the Plug Lid[J].Die & Mould Manufacture,2008,8(5):59-61. |
| |
| Authors: | Chen Shuling |
| |
| Abstract: | Introduced injection mold design and manufacture method of the plug top and bottom lid. The main parts of injection mold were modeled by Pro/E Wildfire3.0 three dimensional, the entire mold frame was modeled and assembled in Pro/E Wirefire3.0 assembly module.Stated the method and step of founded engineering drawing,mold parting and transfering dwg document format. |
| |
| Keywords: | plug lid injection mold Pro/E Wildfire3 0 three dimensional modeling |
| 本文献已被 维普 万方数据 等数据库收录！ |
