Compact Performance Models and Comparisons for Gigascale On-Chip Global Interconnect Technologies

The on-chip global interconnect with conventional Cu/low-k and delay-optimized repeater scheme faces great challenges in the nanometer regime owing to its severe performance degradation. This paper describes the analytical models and performance comparisons of novel interconnect technologies and circuit architectures to cope with the interconnect performance bottlenecks. Carbon nanotubes (CNTs) and optics-based interconnects exhibit promising physical properties for replacing the current Cu/low-k-based global interconnects. We quantify the performance of these novel interconnects and compare them with Cu/low-k wires for future high-performance integrated circuits. The foregoing trends are studied with technology node and bandwidth density in terms of latency and power dissipation. Optical wires have the lowest latency and power consumption, whereas a CNT bundle has a lower latency than Cu. The new circuit scheme, i.e., “capacitively driven low-swing interconnect (CDLSI),” has the potential to effect a significant energy saving and latency reduction. We present an accurate analytical optimization model for the CDLSI wire scheme. In addition, we quantify and compare the delay and energy expenditure for not only the different interconnect circuit schemes but also the various future technologies, such as Cu, CNT, and optics. We find that the CDLSI circuit scheme outperforms the conventional interconnects in latency and energy per bit for a lower bandwidth requirement, whereas these advantages degrade for higher bandwidth requirements. Finally, we explore the impact of the CNT bundle and the CDLSI on a via blockage factor. The CNT shows a significant reduction in via blockage, whereas the CDLSI does not help to alleviate it, although the CDLSI results in a reduced number of repeaters due to the differential signaling scheme.