首页 | 本学科首页   官方微博 | 高级检索  
     

PEMFC翅脉流道传质及输出性能分析
引用本文:孙峰,苏丹丹,殷宇捷,董小平,李志远,庞彬.PEMFC翅脉流道传质及输出性能分析[J].太阳能学报,2022,43(6):414-419.
作者姓名:孙峰  苏丹丹  殷宇捷  董小平  李志远  庞彬
作者单位:1.河北大学质量技术监督学院,保定 071000; 2.河北省新能源汽车动力系统轻量化技术创新中心,保定 071000
基金项目:国家自然科学基金(51902081);;河北省自然科学基金(E2021201032);;保定市科技计划(2074P019);
摘    要:为研究流道结构对质子交换膜燃料电池(PEMFC)反应气体质量传输及输出性能的影响,建立翅脉流道、叶脉流道及蛇形流道的三维PEMFC几何模型,并对比3种流道的反应气体浓度分布、压力分布及电流密度分布,最后对翅脉流道结构参数进行优化。结果表明,与蛇形流道、叶脉流道相比,翅脉流道能明显改善流道和扩散层内反应气体浓度分布的均匀性,有利于强化反应气体向催化层的质量传递;翅脉流道能减小气体压力分布梯度,使反应气体扩散更加充分;翅脉流道的平均膜电流密度更大,有利于促进电化学反应稳定进行;翅脉流道能改善PEMFC的输出性能,翅脉流道峰值功率密度比蛇形流道、叶脉流道分别提高7.72%和6.25%;减小翅脉流道的直流道长度或圆弧流道圆心角,可提升翅脉流道输出性能。

关 键 词:质子交换膜燃料电池  数值模拟  气体流道  翅脉流道  
收稿时间:2022-03-25

MASS TRANSFER AND OUTPUT PERFORMANCE ANALYSIS OF WING VEIN FLOW CHANNEL IN PEMFC
Sun Feng,Su Dandan,Yin Yujie,Dong Xiaoping,Li Zhiyuan,Pang Bin.MASS TRANSFER AND OUTPUT PERFORMANCE ANALYSIS OF WING VEIN FLOW CHANNEL IN PEMFC[J].Acta Energiae Solaris Sinica,2022,43(6):414-419.
Authors:Sun Feng  Su Dandan  Yin Yujie  Dong Xiaoping  Li Zhiyuan  Pang Bin
Affiliation:1. School of Quality and Technical Supervision, Hebei University, Baoding 071000, China; 2. Hebei Technology Innovation Center for Lightweight of New Energy Vehicle Power System, Baoding 071000, China
Abstract:In order to research the influence of flow channel structures on the reaction gas mass transfer and output performance of proton exchange membrane fuel cell (PEMFC), three-dimensional geometric models of wing vein flow channel, serpentine flow channel and leaf vein flow channel are established. Then, the reaction gas concentration distribution, pressure distribution and current density distribution of three flow channels are compared. Furthermore, the structural parameters of the wing vein flow channel are optimized. The main conclusions are as follows: Firstly, compared with serpentine flow channel and leaf vein flow channel, wing vein flow channel can significantly improve the uniformity of reaction gas concentration distribution in channel and diffusion layer, which can enhance the mass transfer of reaction gas in catalytic layer. Secondly, the wing vein flow channel can reduce the gas pressure gradient distribution and promote the diffuse of reaction gas. Thirdly, the average membrane current density of the wing vein flow channel is highest, which is conducive to the stable progress of the electrochemical reaction. Fourthly, the wing vein flow channel can improve the output performance of PEMFC. In addition, the peak power density of wing vein flow channel is 7.72% and 6.25% higher than that of the serpentine flow channel and the leaf vein flow channel respectively. Finally, the output performance of the wing vein flow channel can be improved by reducing the length of the straight flow channel or the center angle of the circular flow channel.
Keywords:proton exchange membrane fuel cell  numerical simulation  flow channel  wing vein flow channel  
点击此处可从《太阳能学报》浏览原始摘要信息
点击此处可从《太阳能学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号