| 一种电控喷油器动态时间参数测试方法 |
| |
| 引用本文： | 郭辉,张振东,程强,孙跃东.一种电控喷油器动态时间参数测试方法[J].中国机械工程,2012(5):626-628. |
| |
| 作者姓名： | 郭辉 张振东 程强 孙跃东 |
| |
| 作者单位： | 上海理工大学;上海工程技术大学 |
| |
| 基金项目： | 高等学校博士学科点专项科研基金资助项目(200802520001);上海市科委科技攻关计划项目(10230501500);上海市高校选拔培养优秀青年教师科研专项基金资助项目(GJD08005);上海市研究生创新基金项目(JWCXSL1001) |
| |
| 摘 要： | 详细分析了电控喷油器的动态工作过程,基于电控喷油器线圈电流变化规律,提出一种测试其动态响应时间的方法。以高性能C8051F310单片机为处理器,设计了喷油器开启与关闭响应时间的测试电路,开发了成本低、测试便捷、精度高的测试系统。实测结果表明,喷油器的开启与关闭的响应时间测量误差分别为0.9%和1.14%,满足喷油器设计开发、生产的要求。同时,给出了开启响应时间随供电电压的变化关系曲线,该曲线为电控喷油器标定及发动机匹配时对喷油量的修正提供了参考。
|
| 关 键 词： | 电控喷油器 动态性能 测试 系统设计 |
Investigation on Measurement Method of Dynamic Response Time for an Electronic Fuel Injector |
| |
| Guo Hui,Zhang Zhendong,Cheng Qiang,Sun Yuedong.Investigation on Measurement Method of Dynamic Response Time for an Electronic Fuel Injector[J].China Mechanical Engineering,2012(5):626-628. |
| |
| Authors: | Guo Hui Zhang Zhendong Cheng Qiang Sun Yuedong |
| |
| Affiliation: | 1.University of Shanghai for Science and Technology,Shanghai,200093 2.Shanghai University of Engineering Science,Shanghai,201620 |
| |
| Abstract: | The dynamic working process of an EFI was analyzed in detail.According to the current curve through the coil of the EFI,a measurement method of the dynamic response time for the EFI was provided.Then the test circuits of the opening and closing response time of the injector were designed,and the measurement system was developed with the C8051F310 as the processor.And the measurement system is low cost,convenient and high precision.The results show that the measurement errors of the opening and closing response time of the EFI are 0.9% and 1.14% respectively,and this meets to the testing requirements of design and research,manufacture of the injector.Meanwhile,the curves of opening response time with the supply voltage were provided,the injection quantity can be amended when the engine was calibrated. |
| |
| Keywords: | electronic fuel injector(EFI) dynamic characteristics measurement system design |
| 本文献已被 CNKI 等数据库收录！ |
|
