| 可控变压边力的盒形件拉深模具设计 |
| |
| 引用本文： | 李西宁,王仲奇,殷俊清. 可控变压边力的盒形件拉深模具设计[J]. 锻压技术, 2006, 31(1): 46-47 |
| |
| 作者姓名： | 李西宁 王仲奇 殷俊清 |
| |
| 作者单位： | 西北工业大学,机电学院,陕西,西安,710072 |
| |
| 摘 要： | 压边结构及压边力对板料拉深成形质量有着重要影响。由于盒形件成形时具有应力分布不均匀、变形分布不均匀以及变形速度不均匀的特点，拉深模具压边结构采用了分区方式，将压边圈分为直边部分和圆角部分，各部分可以协调运动。拉深过程中压边力通过控制系统可以随拉深起皱规律而合理变化，有效地改善法兰区变形的不均匀性，提高盒形件的成形质量。
|
| 关 键 词： | 拉深 盒形件 压边力 |
| 文章编号： | 1000-3940（2006）01-0046-02 |
| 收稿时间： | 2005-03-11 |
| 修稿时间： | 2005-03-11 |
Rectangular box drawing die design of controlled blank holder force |
| |
| LI Xi-ning,WANG Zhong-qi,YIN Jun-qing. Rectangular box drawing die design of controlled blank holder force[J]. Forging & Stamping Technology, 2006, 31(1): 46-47 |
| |
| Authors: | LI Xi-ning WANG Zhong-qi YIN Jun-qing |
| |
| Abstract: | Blank holder structure and blank holder force(BHF) are very important to the part quality in deep drawing.The flange deformation of rectangle parts is not uniformity during forming process.In order to improve the condition,the segment structure of blank holder is introduced to die design.The blank holder is divided into straight part and circular part which can separately move.The BHF can be reasonably changed with the wrinkling law by control system,so the flange formability and the part quality can be improved. |
| |
| Keywords: | deep drawing rectangle part blank holder force |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
