Room Temperature Shear Band Development in Highly Twinned Wrought Magnesium AZ31B Sheet |
| |
Authors: | Jon Scott Michael Miles David Fullwood Brent Adams Ali Khosravani Raja K Mishra |
| |
Affiliation: | 1. Mechanical Engineering, Brigham Young University, Provo, UT, 84602, USA 4. Infinite Technologies, Inc, Folsom, CA, 95630, USA 2. Manufacturing Engineering Technology, Brigham Young University, Provo, UT, 84602, USA 5. Materials Science and Engineering, Drexel University, Warminster, PA, USA 3. General Motors R&D Center, Warren, MI, 48090, USA
|
| |
Abstract: | Failure mechanisms were studied in wrought AZ31B magnesium alloy after forming under different strain paths. Optical micrographs were used to observe the shear band formation and regions of high twin density in samples strained under uniaxial, biaxial, and plane strain conditions. Interrupted testing at 4?pct effective strain increments, until failure, was used to observe the evolution of the microstructure. The results showed that shear bands, with a high percentage of twinned grains, appeared early in the samples strained under biaxial or plane strain tension. These bands are similar to those seen in uniaxial tension specimens just prior to failure where the uniaxial tensile ductility was much greater than that observed for plane strain or biaxial tension conditions. A forming limit diagram for AZ31B, which was developed from the strain data, showed that plane strain and biaxial tension had very similar limit strains; this contrasts with materials like steel or aluminum alloys, which typically have greater ductility in biaxial tension compared to plane strain tension. |
| |
Keywords: | |
本文献已被 SpringerLink 等数据库收录! |
|