| 双机架紧凑式炉卷轧机板形控制研究 |
| |
| 引用本文： | 王钧洪,宁德宇,张竹明,赵宇,石锦,史庆南. 双机架紧凑式炉卷轧机板形控制研究[J]. 机械, 2006, 33(9): 20-22 |
| |
| 作者姓名： | 王钧洪 宁德宇 张竹明 赵宇 石锦 史庆南 |
| |
| 作者单位： | 昆明钢铁集团公司,云南,昆明,6503021;昆明理工大学,材料与冶金工程学院,云南,昆明,650093 |
| |
| 摘 要： | 介绍了昆明钢铁公司的双机架紧凑式炉卷轧机的布置形式以及其板形控制设备与工艺。在现有控制模型下，提出了采用传统计算方法、有限元计算（采用大型通用有限元软件MSC．Marc）、经验估计与对比三者相结合的设计流程设计计算轧辊辊型。实际生产结果表明，该方法能较准确而迅速地设计出轧辊辊型。
|
| 关 键 词： | 炉卷轧机 板带 有限元模拟 板形 |
| 文章编号： | 1006-0316（2006）09-0020-03 |
| 收稿时间： | 2006-06-02 |
| 修稿时间： | 2006-06-02 |
Research on shape control of steckel mill |
| |
| WANG Jun-hong,NING De-yu,ZHANG Zhu-ming,ZHAO Yu,SHI Jin,SHI Qing-nan. Research on shape control of steckel mill[J]. Machinery, 2006, 33(9): 20-22 |
| |
| Authors: | WANG Jun-hong NING De-yu ZHANG Zhu-ming ZHAO Yu SHI Jin SHI Qing-nan |
| |
| Affiliation: | 1.Kunming Iron and Steel Group Co.Ltd, Kunming 650302, China; 2.Faculty of Materials and Metallurgical Engineering, Kunming University of Science and Technology, Kunming 650093, China |
| |
| Abstract: | The paper introduced arrangement form,flatness control equipment and craft of a pair of framework compactness type steckel mill of the Kunming Iron and Steel Group Co.Ltd to.Under the existing model of controlling,the design procedure that combine the traditional computing technology,the FEM(use the CAE simulation software package-MSC.Marc) and experience together is put forward to designs and calculates the roller type.The practical data indicates,this method can design the roller type rapidly and accurately. |
| |
| Keywords: | steckel mill strip finite element simulation shape |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
