首页 | 本学科首页   官方微博 | 高级检索  
     

水泥专用丁苯胶乳的工业放大试验
引用本文:迟德旭,宋以清,郑兴愿,方仕江.水泥专用丁苯胶乳的工业放大试验[J].合成橡胶工业,2007,30(2):85-88.
作者姓名:迟德旭  宋以清  郑兴愿  方仕江
作者单位:1. 山东齐翔石油化工集团有限公司,山东,淄博,255438
2. 浙江大学,高分子工程研究所,浙江,杭州,310027
摘    要:研究了水泥专用丁苯胶乳从2m3中试聚合釜到20m3工业规模聚合釜的放大过程。结果表明:采用单位体积功率与搅拌桨的叶端剪切速率相结合的放大准则,能够在20m3工业聚合釜重现2m3中试聚合釜的反应结果。以38→48→40r/min变搅拌转速的操作方式可以制得平均粒径为110~120nm、粒径分布指数为0·050~0·065和化学稳定性及机械稳定性优异的水泥专用丁苯胶乳。

关 键 词:丁苯胶乳  乳液聚合  工业试验  单位体积功率  叶端剪切速率
文章编号:1000-1255(2007)02-0085-04
修稿时间:2006-04-292006-11-07

Industrial scale experiment of styrene-butadiene rubber latex for cement
Chi Dexu,Song Yiqing,Zheng Xingyuan,Fang Shijiang.Industrial scale experiment of styrene-butadiene rubber latex for cement[J].China Synthetic Rubber Industry,2007,30(2):85-88.
Authors:Chi Dexu  Song Yiqing  Zheng Xingyuan  Fang Shijiang
Affiliation:1. Shandong Qixiang Petrochemical Group Co Ltd, Zibo 255438, China ; 2. Institute of Polymer Engineering, Zhejiang University, Hangzhou 310027, China
Abstract:The emulsion polymerization of styrene-butadiene rubber latex from 2 m^3 pilot plant to 20 m^3 industrial scale reactor was studied. The resuits indicated that the characteristics of emulsion polymerization of styrene-butadiene rubber latex in 2 m^3 reactor were reproduced in 20 m^3 reactor. Styrene-butadiene rubber latex with narrower size distribution, excellent chemical and mechanical stabilities were obtained while the magnification rule of unit volume power combined with tip shear rate of stirrer paddle was adopted. In addition, it was observed that the stability of styrene-butadiene rubber latex was improved by using changeable stirring speeds in the process of the emulsion polymerization in 20 m^3 reactor, and the particle size was 110 - 120 nm, particle diameter distribution index was 0. 050 - 0. 065.
Keywords:styrene-butadiene rubber latex  emulsion polymerization  industrial scale experiment  unit volume power  tip shear rate
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号