首页 | 本学科首页   官方微博 | 高级检索  
     

工艺参数对镍基单晶高温合金DD98瞬态液相连接组织的影响
引用本文:郭修磊,李文,金涛. 工艺参数对镍基单晶高温合金DD98瞬态液相连接组织的影响[J]. 沈阳理工大学学报, 2007, 26(4): 15-18
作者姓名:郭修磊  李文  金涛
作者单位:1. 沈阳理工大学,材料科学与工程学院,辽宁,沈阳,110168;中国科学院沈阳金属研究所
2. 沈阳理工大学,材料科学与工程学院,辽宁,沈阳,110168
3. 中国科学院沈阳金属研究所
摘    要:利用Ni-Cr-Co-W-B合金作为中间层合金对DD98镍基单晶高温合金进行瞬态液相连接,利用光学显微镜和扫描电镜对不同连接温度和时间下的接头组织进行观察分析,结果表明,连接区域由连接区,扩散区和基体区组成,随着连接温度的提高或保温时间的延长,连接区上的残余液相宽度逐渐变窄.

关 键 词:DD98镍基单晶高温合金  瞬态液相连接  工艺参数  接头组织
文章编号:1003-1251(2007)04-0015-04
修稿时间:2006-11-30

Influence of Process Parameters on Microstructure of TLP Bonded DD98 Ni-base Single Crystal Superalloy
GUO Xiu-lei,LI Wen,JIN Tao. Influence of Process Parameters on Microstructure of TLP Bonded DD98 Ni-base Single Crystal Superalloy[J]. Transactions of Shenyang Ligong University, 2007, 26(4): 15-18
Authors:GUO Xiu-lei  LI Wen  JIN Tao
Affiliation:1. Shenyang Ligong University Shenyang 110168, China;2. Institute of Metal Research, Chinese Academy of Sciences
Abstract:DD98 Nickel-base single crystal superalloys are bonded by transient liquid phase(TLP) bonding using Ni-Cr-Co-W-B alloy as an interlayer alloy.The bonded zones are observed using optical microscope(OM) and scanning electron microscope(SEM).The analysis results indicate that the joint zone consists of the bond,diffusion and matrix regions,and the width of the residual liquid zone becomes narrow gradually with the increases of the bonding temperature and heat preservation time.
Keywords:DD98 Ni-base single crystal superalloy  transient liquid phase(TLP) bonding  process parameters  joint microstructure
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号