| 基于修正单纯形法的圆柱度误差优化评定 |
| |
| 引用本文： | 郑鹏,雷文平,侯伯杰.基于修正单纯形法的圆柱度误差优化评定[J].郑州大学学报(工学版),2004,25(2):87-90. |
| |
| 作者姓名： | 郑鹏 雷文平 侯伯杰 |
| |
| 作者单位： | 郑州大学机械工程学院,河南,郑州,450002 |
| |
| 基金项目： | 河南省自然科学基金，郑州大学校科研和教改项目 |
| |
| 摘 要： | 对圆柱度误差评定理论及应用进行了研究,建立了圆柱度误差评定的规划模型,探讨了误差评定的最小条件判据,提出直接求解规划模型的修正单纯形法,并给出了求解的步骤.最后对实际测量数据进行了误差评定,结果证明,该方法有较高的精度和速度.另外,此评定方法具有很强的通用性,对于其它形状误差的求解提供参考.
|
| 关 键 词： | 误差评定 圆柱度误差 修正单纯形法 |
| 文章编号： | 1671-6833(2004)02-0087-04 |
| 修稿时间： | 2004年1月12日 |
Optimization Evaluation of Cylindricity Error Based on Correctional Simplex Method |
| |
| ZHENG Peng,LEI Wen-ping,HOU Bo-jie.Optimization Evaluation of Cylindricity Error Based on Correctional Simplex Method[J].Journal of Zhengzhou University: Eng Sci,2004,25(2):87-90. |
| |
| Authors: | ZHENG Peng LEI Wen-ping HOU Bo-jie |
| |
| Abstract: | This paper analyses the theory and application of cylindricity error evaluation, establishes a kind of programming model for evaluation of cylindricity error, and discusses the minimum conditions criterion.The correctional simplex method for direct solution of the programming model is proposed,and the process also is given.Finally, a cylindricity error has been assessed on the measured data, and the calculation results are shown in the paper.By the experiment results,this calculating method has properties such as high precision and high speed.On the other hand, it has wide usability and can be used to calculate errors of other forms. |
| |
| Keywords: | error evaluation cylindricity error correctional simplex method |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
