| 高速线材飞剪前后导钢装置的改进 |
| |
| 引用本文： | 孙汝林,赵自义,王玉存,司永红,李玉成.高速线材飞剪前后导钢装置的改进[J].轧钢,2005,22(6):44-45. |
| |
| 作者姓名： | 孙汝林 赵自义 王玉存 司永红 李玉成 |
| |
| 作者单位： | 安阳钢铁股份有限公司,河南,安阳,455004 |
| |
| 摘 要： | 针对高速线材生产线1#～3#飞剪前后导钢装置因结构不合理导致的堆钢问题，采取增加活动挡板和滑动止挡板、更换备件、改进过渡导槽孔型等措施，有效地防止了堆钢事故的发生，提高了轧机生产效率。
|
| 关 键 词： | 线材生产 飞剪 导钢装置 装置改进 |
| 文章编号： | 1003-9996(2005)06-0044-02 |
| 收稿时间： | 2004-11-17 |
| 修稿时间： | 2005-04-10 |
Improvement of guide unit before and after flying shears of high-speed wire rod mill |
| |
| SUN Ru-lin,ZHAO Zi-yi,WANG Yu-cun,SI Yong-hong,LI Yu-cheng.Improvement of guide unit before and after flying shears of high-speed wire rod mill[J].Steel Rolling,2005,22(6):44-45. |
| |
| Authors: | SUN Ru-lin ZHAO Zi-yi WANG Yu-cun SI Yong-hong LI Yu-cheng |
| |
| Abstract: | In view of the unreasonable structure of guide unit before and after flying shears to bring stackup of pieces, some improvement measures were put forward. Therefore the accident was reduced and the production efficiency of mill was increased. |
| |
| Keywords: | wire rod production flying shear guide unit improvement |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
