| 腐蚀磨损交互作用的定量研究 |
| |
| 引用本文： | 张天成,姜晓霞,路新春,李诗卓.腐蚀磨损交互作用的定量研究[J].材料研究学报,1994,8(5):397-402. |
| |
| 作者姓名： | 张天成 姜晓霞 路新春 李诗卓 |
| |
| 作者单位： | 中国科学院金属研究所 |
| |
| 摘 要： | 测量了不同载荷下４０Ｃｒ钢和３０４不锈钢在３．５％ＮａＣｌ溶液中的腐蚀磨损率，用Ｔａｆｅｌ法和极化阻力技术测定了静态及磨损状态下的腐蚀率，并用浸泡实验结果了予以修正，定量分析了两种材料在３．５％ＮａＣｌ水溶液中腐蚀磨损交互作用量，结果表明腐蚀对磨损的加速作用是材料流失的主要原因。
|
| 关 键 词： | 腐蚀磨损 交互作用 定量分析 |
| 收稿时间： | 1994-10-25 |
| 修稿时间： | 1994-10-25 |
QUANTITATIVE ANALYSIS OF SYNERGY BETWEEN CORROSION AND WEAR |
| |
| ZHANG Tiancheng,JIANG Xiaoxia,LU Xinchun,LI Shizhuo.QUANTITATIVE ANALYSIS OF SYNERGY BETWEEN CORROSION AND WEAR[J].Chinese Journal of Materials Research,1994,8(5):397-402. |
| |
| Authors: | ZHANG Tiancheng JIANG Xiaoxia LU Xinchun LI Shizhuo |
| |
| Affiliation: | ZHANG Tiancheng,JIANG Xiaoxia,LU Xinchun,LI Shizhuo (Institute of Melal Research,Academia Sinica) |
| |
| Abstract: | The corrosive wear rates of 40Cr steel and 304SS in 3.5%NaCI solution were measured experimentally, the corrosion rates under wearing and steady state respectively were also measured with Tafel method as well as the polarization resistence technique, and were calibrated by the results of immersion test.The synergistic amounts between corrosion and wear of the steels in 3.5% NaCl solution were quanhtatively analysed. It shows that the corrosion-induced wear is the main reason of the material removal. |
| |
| Keywords: | Corrosive wear Synergy Quantitative analysis |
| 本文献已被 CNKI 维普 等数据库收录！ |
| 点击此处可从《材料研究学报》浏览原始摘要信息 |
|
点击此处可从《材料研究学报》下载全文 |
|
