首页 | 本学科首页   官方微博 | 高级检索  
     

非理想电源电压下的谐波检测方法研究
引用本文:冯宇,史丽萍,方永丽. 非理想电源电压下的谐波检测方法研究[J]. 电气应用, 2007, 26(9): 102-106
作者姓名:冯宇  史丽萍  方永丽
作者单位:中国矿业大学信电学院,221008;中国矿业大学信电学院,221008;中国矿业大学信电学院,221008
摘    要:准确、快速、方便的谐波检测方法是实现有源滤波的重要前提.提出了一种非理想电源电压下的谐波检测方法.该方法首先通过对电源电压的预处理得到了电压基波正序分量的相位信息,然后对电流做dq变换,利用积分环节提取直流分量,最终实现了电流基波正序有功分量的准确检测.运算量明显小于同类方法;为提高动态性能,给出了一种缩短检测信号移相延时的策略;仿真表明该方法能准确快速地进行谐波检测,且动态过程不存在振荡超调.

关 键 词:非理想电源电压  谐波检测  积分环节  信号移相延时

Study on the Harmonics Detecting Method Under the Non-Ideal Source Voltage
Feng Yu. Study on the Harmonics Detecting Method Under the Non-Ideal Source Voltage[J]. Electrotechnical Application, 2007, 26(9): 102-106
Authors:Feng Yu
Abstract:The exact, fast and convenient detecting method for harmonics is the important precondition to implement the active filtering. It's present that a harmo nics detecting method under the non-ideal source voltage. With this method,the phase information of the voltage fundamental positive component can be obta ined by pretveating the source voltage firstly,then carry through the dq trans formation on current. The DC component can be picked up by using the integratio n link. Finally, it is implemented that the current fundamental positive-acti ve component is exactly detected. The operand is markedly less than congener al gorithms. In order to improve the dynamic performance, a strategy to shorten t he phase-shift time lapse of the detected signal. The simulation results show that this method can be used to detect harmonics fast and exactly, and that no surge overshoot exists during the dynamic process.
Keywords:
本文献已被 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号