首页 | 本学科首页   官方微博 | 高级检索  
     

高钒高速钢的冲击磨料磨损性能试验
引用本文:马陟祚,龙锐,魏世忠.高钒高速钢的冲击磨料磨损性能试验[J].铸造,2005,54(6):549-552.
作者姓名:马陟祚  龙锐  魏世忠
作者单位:1. 河南科技大学材料科学与工程学院,河南,洛阳,471003
2. 河南省耐磨材料工程技术研究中心,河南,洛阳,471003
3. 河南科技大学材料科学与工程学院,河南,洛阳,471003;河南省耐磨材料工程技术研究中心,河南,洛阳,471003
摘    要:以高铬铸铁(Cr26及高锰钢Mn13Cr2为对比材料,在MLD-10动载磨料磨损试验机上研究了高钒高速钢以鹅卵石为磨料时的冲击磨料磨损性能.结果表明,冲击功为0.5J时,高钒高速钢(V10)的耐磨性是高铬铸铁(Cr26)的2.1倍,是高锰钢(Mn13Cr2)的2.8倍.随13着冲击功的增大,高钒高速钢(V10)的耐磨性大幅下降,但其耐磨性仍高于高铬铸铁(Cr26)和高锰钢(Mn13Cr2).

关 键 词:高钒高速钢  冲击  磨料磨损
文章编号:1001-4977(2005)06-0549-04
修稿时间:2005年1月11日

Experimental Study of the Impact Abrasive Wear Property of High Vanadium High Speed Steel
MA Zhi-zuo,Long Rui,WEI Shi-zhong.Experimental Study of the Impact Abrasive Wear Property of High Vanadium High Speed Steel[J].Foundry,2005,54(6):549-552.
Authors:MA Zhi-zuo  Long Rui  WEI Shi-zhong
Abstract:Together with high chromium cast iron(Cr26)and high manganese steel(Mn13Cr2),the impact abrasive wear property of high vanadium high speed steel(HSS) were studied in the experimental machine of dynamic load abrasion tester MLD-10. The abrasive chosen was cobblestone,which grain size was from 1 mm to 3 mm. The results show that the wear resistance of high vanadium HSS(V10)is above 2.1 and 2.8 times than that of high chromium cast iron(Cr26)and high manganese steel(Mn13Cr2)respectively. With the increasing of impact energy,the wear resistance of high vanadium HSS(V10)would be decreased. Compared with high chromium cast iron(Cr26)and high manganese steel(Mn13Cr2), the superiority of the wear resistance of high vanadium HSS is un-conspicuous at high impact energy.(3.
Keywords:high vanadium HSS  impact  abrasive wear
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号