| 门外壳斜楔拉伸模设计 |
| |
| 引用本文： | 杨安民.门外壳斜楔拉伸模设计[J].模具工业,2001,1(1):20-21. |
| |
| 作者姓名： | 杨安民 |
| |
| 作者单位： | 河南新飞电器有限公司 |
| |
| 摘 要： | 通过对门外壳零件技术要求和成形工艺的分析 ,设计出三面压料式斜楔拉伸模 ,有效地解决了在已局部成形的零件上进行后续拉伸时零件的翘曲变形问题。
|
| 关 键 词： | 门外壳 三面压料装置 斜楔 拉伸模 翘曲变形 |
| 修稿时间： | 2000年8月10日 |
Design of the Drawing Die with a Cam Driver for the Door Outer Shells |
| |
| Yang Anmin.Design of the Drawing Die with a Cam Driver for the Door Outer Shells[J].Die & Mould Industry,2001,1(1):20-21. |
| |
| Authors: | Yang Anmin |
| |
| Abstract: | Through the analysis of the technical requirement and forming technology of the Door Outer Shell, a three-side-pressing drawing die with a cam driver was designed. It effectively solved the problem of turning-up deformation when making after-drawing of the part-formed parts. |
| |
| Keywords: | door outer shells three-side-pressing device cam driver drawing die turning-up deformation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
