| 熔体发泡法制备多孔泡沫钢工艺研究 |
| |
| 引用本文： | 张冬平,蒋业华,郑开宏,苏志辉. 熔体发泡法制备多孔泡沫钢工艺研究[J]. 南方金属, 2010, 0(4) |
| |
| 作者姓名： | 张冬平 蒋业华 郑开宏 苏志辉 |
| |
| 作者单位： | 1. 广州有色金属研究院,广东,广州,510651
2. 昆明理工大学,云南,昆明,650093 |
| |
| 摘 要： | 采用熔体发泡法制备多孔泡沫钢,成功制备出了孔隙率为44.6%的泡沫钢,同时分析了钢液的粘度对泡沫钢内部孔的形状、尺寸的影响.
|
| 关 键 词： | 熔体发泡 泡沫钢 孔隙率 粘度 |
A study of fabricating porous steel by melt foaming method |
| |
| ZHANG Dong-ping,JIANG Ye-hua,ZHENG Kai-hong,SU Zhi-hui. A study of fabricating porous steel by melt foaming method[J]. Southern Metals, 2010, 0(4) |
| |
| Authors: | ZHANG Dong-ping JIANG Ye-hua ZHENG Kai-hong SU Zhi-hui |
| |
| Affiliation: | ZHANG Dong-ping1,JIANG Ye-hua2,ZHENG Kai-hong1,SU Zhi-hui1(1.Guangzhou Research Institute of Non-ferrous Metals,Guangzhou 510651,China,2.Kunming University of Science and Technology,Kunming 650093,China) |
| |
| Abstract: | Porous steel with a porosity of 44.6% was fabricated by means of melt foaming.The effects of the melt viscosity on the shape and size of the pores in the porous steel were also investigated. |
| |
| Keywords: | melt foaming method porous steel porosity viscosity |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
