Compatibility of polyacrylates and polymethacrylates with poly(vinyl chloride): 1. Compatibility and temperature variation |
| |
Authors: | DJ Walsh JG McKeown |
| |
Affiliation: | Department of Chemical Engineering and Chemical Technology, Imperial College of Science and Technology, London SW7, UK |
| |
Abstract: | Mixtures of a series of polymethacrylates and polyacrylates with PVC were prepared by solvent casting from methyl ethyl ketone. Some mixtures were also prepared by mechanical mixing and in situ polymerization (polymerization of vinyl chloride monomer in the presence of the other polymer). The mixtures were assessed for compatibility by dynamic mechanical measurements and optical clarity. It was found that all polymethacrylates from poly(methyl methacrylate) to poly(n-hexyl methacrylate) were compatible with PVC as were poly(n-propyl acrylate) and poly(n-butyl acrylate). Higher chain polyacrylates are incompatible. Poly(methyl acrylate) and poly(ethyl acrylate) appear incompatible with PVC when mixtures are prepared by solvent casting, but compatible when prepared by in situ polymerization, and mechanical mixtures show some sign of compatibility. It seems possible that in this case the solvent interferes with the compatibility. Mixtures of PVC with poly(n-hexyl methacrylate), poly(n-butyl acrylate) and poly(n-propyl acrylate) phase separate when heated in the region between 100°C and 160°C indicating the existence of a lower critical solution temperature. |
| |
Keywords: | |
本文献已被 ScienceDirect 等数据库收录! |
|