首页 | 本学科首页   官方微博 | 高级检索  
     

电化学抛光中电解液的失效分析
引用本文:刘恒全,季士委,潘长江,黄楠.电化学抛光中电解液的失效分析[J].腐蚀科学与防护技术,2007,19(2):151-153.
作者姓名:刘恒全  季士委  潘长江  黄楠
作者单位:西南交通大学,材料先进技术教育部重点实验室,成都,610031
摘    要:阐述了电化学抛光中磷酸、硫酸、铬酐各组分及所起的作用,以不锈钢为研究对象,通过测定单位体积通过电量后的溶液中Fe3+、Cr3+浓度变化作为失效的判断依据;分析了电解液各组分对抛光质量和抛光液寿命的影响,并作出了判断抛光液失效的指标和测量方法,得出了三者在电化学抛光中的控制范围,为控制抛光工艺过程和保证抛光质量提供了依据.

关 键 词:抛光液  浓度  失效
文章编号:1002-6495(2007)02-0151-03
收稿时间:2006-04-25
修稿时间:2006-06-21

AN ANALYSIS ON INEFFICACY OF ELECTROLYTE FOR ELECTROCHEMICAL POLISHING
LIU Heng-quan,JI Shi-wei,PAN Chang-jiang,HUANG Nan.AN ANALYSIS ON INEFFICACY OF ELECTROLYTE FOR ELECTROCHEMICAL POLISHING[J].Corrosion Science and Protection Technology,2007,19(2):151-153.
Authors:LIU Heng-quan  JI Shi-wei  PAN Chang-jiang  HUANG Nan
Affiliation:Key Laboratory of Advanced Technology of Materials, Chinese Education Ministry, Southwest Jiaotong University, Chengdu 610031
Abstract:The functions of phosphorus acid,sulfur acid and cheese anhydride in electrolyte for electrochemical polishing were stated in this paper.Using stainless steel as research object,the inefficacy of electrolyte solution was analyzed by investigating the changes of concentration of Fe3+ and Cr3+ as a function of current density.The influence of each ingredient in the elecrolyte on polishing effeciency was analyzed,moreover,the index of judging the inefficacy of the electrolyte and the relevant measuring method were obtained,the control range of three ingredients was also detemined.It is important to control technical process so that to guarantee the quality of electrochemical polishing.
Keywords:polishing fluid  proportionment  concentration  invalidation
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《腐蚀科学与防护技术》浏览原始摘要信息
点击此处可从《腐蚀科学与防护技术》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号