首页 | 本学科首页   官方微博 | 高级检索  
     

回收无碳复写废纸最佳工艺条件的优化
引用本文:周立国,刘伟,陈一霞,周建华.回收无碳复写废纸最佳工艺条件的优化[J].青岛科技大学学报,2003,24(4):344-346.
作者姓名:周立国  刘伟  陈一霞  周建华
作者单位:山东轻工业学院化学工程系 山东济南250100 (周立国,刘伟,陈一霞),山东轻工业学院化学工程系 山东济南250100(周建华)
摘    要:对回收无碳复写废纸工艺进行了最佳工艺条件的优化实验。结果表明 :影响回收纸浆白度的因素主要有碎解温度、碎解时间、熟化时间、脱墨剂用量、洗涤次数 ;影响大小依次是碎解温度 >脱墨剂用量 >洗涤次数 >碎解时间 >熟化时间 ;最佳条件为碎解温度 70℃ ,碎解时间 60 min,脱墨剂用量 0 .3%~ 0 .4% ,熟化时间 2 0 min,洗涤次数 2~ 3次。在该条件下对无碳复写废纸脱墨的纸浆白度可达 87.67% ,比同类产品的 84.1 0 %高出 3.5 7%。

关 键 词:废纸回收  脱墨  优化
文章编号:1001-4764(2003)04-0344-03
修稿时间:2003年5月16日

Optimization of the Process Conditions for Recovering Carbon-free Waste Paper
ZHOU Li guo,LIU Wei,CHEN Yi xia,ZHOU Jian hua.Optimization of the Process Conditions for Recovering Carbon-free Waste Paper[J].Journal of Qingdao University of Science and Technology:Natutral Science Edition,2003,24(4):344-346.
Authors:ZHOU Li guo  LIU Wei  CHEN Yi xia  ZHOU Jian hua
Abstract:The process conditions for recovering carbon free waste paper were optimized.The results showed that the influence factors on whiteness of pulp were breaking temperature,breaking time,ageing time,amount of deinking agent and times of washing.The order of influence was breaking temperature>amount of deinking agent>times of washing>breaking time>ageing time.The obtained optimum conditions were breaking temperature 70 ℃,breaking time 60 min,amount of deinking agent 0.3 %~0.4 %,ageing time 20 min,times of washing 2~3.Under above conditions,the whiteness of pulp can reach 87.67 %,which is 3.57 % higher than that of the same kind of product.
Keywords:waste paper  deinking agent  optimization
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号