Highly Reactive β-Dicalcium Silicate |
| |
Authors: | Nakshatra B Singh Sarita Rai Neelam Singh |
| |
Affiliation: | Department of Chemistry, Gorakhpur University, Gorakhpur 273009, India |
| |
Abstract: | Calcium silicate hydrate was prepared by hydrothermal reaction between calcium oxide and silica (C/S = 2.0) at a temperature of 205°–215°C and a pressure of 17–19 bar. This reaction with decomposition at 900°C produced highly reactive β-dicalcium silicate (specific surface area 4.55 m2/g) contaminated with small amounts of wollastonite as an impurity. Infrared spectral studies have shown that β-dicalcium silicate prepared at 900°C is less symmetric compared with the control prepared at 1450°C using boron trioxide as a stabilizer. The specific surface area of β-dicalcium silicate decreased with temperature. The hydration studies were done by determining the nonevaporable water, calcium hydroxide (CH) contents, and specific surface area of the hydrated samples. X-ray diffraction studies were also done. The results showed that prepared β-dicalcium silicate is highly reactive. Calcium chloride (1.0 wt%) and gypsum retard the hydration. Possible causes of high reactivity have been discussed. |
| |
Keywords: | dicalcium silicate portland cement thermal decomposition |
|