Effect of coagulation treatment on antifouling properties of PVC nanocomposite membrane in a submerged membrane system for water treatment

A submerged membrane system was used in this work to investigate the effect of the polyaluminum chloride (PAC) coagulant on the antifouling performance of the polyvinyl chloride/alumina (PVC/Al₂O₃) nanocomposite membrane. The prepared nanocomposite membranes were characterized with field emission scanning electron microscopy (FE-SEM), atomic force microscopy, contact angle, porosity measurement, and pure water flux. The results revealed that the membrane containing Al₂O₃ nanoparticles (the mass ratio of PVC to Al₂O₃ was 98.5/1.5) had a higher hydrophilicity, porosity, and pure water flux than other membranes. The FE-SEM images showed that when Al₂O₃ nanoparticles were present in the PVC membrane, large pores and macrovoids formed on the surface and cross-section of the membrane. The fouling behavior of membranes was investigated through the filtration of humic acid (HA) solution with and without the PAC coagulant. Without PAC addition, the PVC/Al₂O₃ membrane significantly decreased the irreversible fouling ratio from 60.7% to 19.4% and showed a high HA removal efficiency of approximately 90.5%. The Hermia model confirmed that the cake formation mechanism best described the experimental data for the neat PVC and nanocomposite membranes with the presence and absence of the PAC coagulant. This confirms that the PAC coagulant can significantly mitigate fouling and improve HA removal in the submerged membrane system.