| 常温固化耐磨防腐涂料的研制 |
| |
| 引用本文： | 王永伟,王志杰,冀亚超.常温固化耐磨防腐涂料的研制[J].现代涂料与涂装,2008,11(2):9-11. |
| |
| 作者姓名： | 王永伟 王志杰 冀亚超 |
| |
| 作者单位： | 陕西科技大学,西安,710021 |
| |
| 摘 要： | 以聚氨酯为基体，添加聚四氟乙烯、氧化铁、钛白粉等填料，研制出一种双组分常温固化涂料。通过正交试验和极差分析得出最佳配方。当聚氨酯的用量为10g、聚四氟乙烯为4g、钛白粉为0．5g、氧化铁为0．5g时，测试结果表明涂层综合性能最佳，即：涂层的附着力为0级，硬度为3H，磨耗量为0．018g。
|
| 关 键 词： | 聚氨酯 常温固化 耐磨防腐涂料 |
| 文章编号： | 1007-9548(2008)02-0009-03 |
| 修稿时间： | 2007年10月19 |
The Development of Air -Drying Abrasion Resistant Anticorrosive Paint |
| |
| WANG Yong-wei,WANG Zhi-jie,JI Ya-chao.The Development of Air -Drying Abrasion Resistant Anticorrosive Paint[J].Modern Paint and Finishing,2008,11(2):9-11. |
| |
| Authors: | WANG Yong-wei WANG Zhi-jie JI Ya-chao |
| |
| Affiliation: | WANG Yong - wei, WANG Zhi - fie, JI Ya - chao |
| |
| Abstract: | A kind of two -pack air- drying paint is prepared with polyurethane as binder, polytetrafluoroethylene, iron oxide, titanium dioxide and et al as filler. The formulation is optimized through the orthogonal experiment and range method. The comprehensive performance of the obtained paint can reach the best while the amount of polyurethane, polytetrafltroroethylene, titanium dioxide and iron oxide are 10 g, 4 g, 0. 5 g and 0. 5 g respectively. The test results show that the adhesion, hardness and abrasion value of the coating are 0 grade, 3H and 0. 018 g respectively. |
| |
| Keywords: | polyurethane air dry abrasion resistant anticorrosive paint |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
