| 不同调节方式影响铸嘴型腔出口速度、出口温度分布的研究 |
| |
| 引用本文： | 刘晓波,陈三风.不同调节方式影响铸嘴型腔出口速度、出口温度分布的研究[J].南方冶金学院学报,2003,24(5):29-33. |
| |
| 作者姓名： | 刘晓波 陈三风 |
| |
| 作者单位： | [1]南方冶金学院科技产业处,江西赣州34l000 [2]南方冶金学院机电工程学院,江西赣州341000 |
| |
| 基金项目： | 江西省自然科学基金资助项目(0250020). |
| |
| 摘 要： | 本文研究了两种典型入口速度调节方式对铸嘴型腔流场和温度场的影响。通过数值方法对铸嘴型腔非定常流动和传热进行了仿真分析。结果表明：在同一变化幅值情况下，入口速度阶跃变化、斜坡函数变化后的熔体出口速度、出口温度分布基本相同．
|
| 关 键 词： | 铸嘴型腔 调节方式 流场 温度场 数值仿真 |
| 文章编号： | 1007-1229(2003)05-0029-05 |
Study on the Effect of Different Adjusting Amplitudes for the Velocity and Temperature Distribution at the Exit of Tip Cavity |
| |
| LIU Xiao-bo ,CHEN San-feng.Study on the Effect of Different Adjusting Amplitudes for the Velocity and Temperature Distribution at the Exit of Tip Cavity[J].Journal of Southern Institute of Metallurgy,2003,24(5):29-33. |
| |
| Authors: | LIU Xiao-bo CHEN San-feng |
| |
| Affiliation: | LIU Xiao-bo 1,CHEN San-feng 2 |
| |
| Abstract: | In this paper,the influences of adjusting amplitude at different velocities on the flow field and temperature field at the exit of tip cavity are studied.Numerical method is used to simulate the nonsteady flow and heat transfer in tip cavity.The simulation results indicate the larger the adjusting amplitude is,the longer time it takes the exit temperature and velocity transit to steady state,which provides basis to find out the feasible adjusting zone for disposing fluid to realize adjusting the flow field and temperature field in tip cavity online. |
| |
| Keywords: | tip cavity adjusting amplitude flow field temperature field numerical simulation |
| 本文献已被 CNKI 维普 等数据库收录！ |
