Abstract: | Behaviour of light metals with PVD-CrN coatings using different test methods The application of thin hard coatings on machining tools, e.g. drilling tools is state of the art. The increase of lifetime of coated Tools compared to uncoated tools is well known. 1]. In this context ?separation of functions”? is an often used phrase, by meaning the separation of functions of the volume and the surface of materials. Going one step forward, from the point of view of tribology or corrosion this means, you have ?only”? to protect the surface by using a ?good”? coating without looking at the material underneath. In the past the influence of substrate materials or the optimization of the system (substrate-coating) was not the main aim of PVD development. Looking at substrate and coating as a system is especially necessary, if the differences of the properties of substrate and coating are large (e.g. hard coating – light metals). This paper shows different aspect of the tribological and electrochemical characterization of PVD coated light metals (CrN coating). |