Effect of abrasive jet process parameters on machining glass fibre reinforced polymer composite |
| |
Authors: | S Madhu M Balasubramanian |
| |
Affiliation: | 1. Saveetha School of Engineering, Dept. of Automobile Engineering, Chennai-602105, India;2. R.M.K College of Engg. and Technology, Department of Mechanical Engineering, Thiruvallur-601206, India |
| |
Abstract: | An experimental and theoretical research work on abrasive jet machining of glass fiber reinforced polymer composite materials was conducted using abrasive jet machining setup fabricated in our workshop. The objective of this research work is to machine holes on the glass fiber reinforced polymer composite using an abrasive jet machine under various levels of process parameter. The material removal rate and hole geometry (kerf analysis) were observed as a part of the investigation. Four factors five levels central composite rotatable design matrix was used for optimizing the required number of experiments. The objective of the present investigation is to develop mathematical models using the response surface methodology. The adequacy of the models has been checked using the ANOVA technique. Use of the developed mathematical models, material removal rate and hole geometry of the machined glass fibre reinforced polymer composite helps prediction at 95% confidence level. |
| |
Keywords: | Glass fiber reinforced polymer Abrasive jet machining material removal rate Kerf analysis Design of experiments Glasfaserverstä rktes Polymer Abrasivstrahlbearbeitung Materialabtragrate Kerbanalyse Design of experiment |
|