| 热镦开式模选材与复合渗强化处理 |
| |
| 引用本文： | 王荣滨. 热镦开式模选材与复合渗强化处理[J]. 热处理, 2001, 16(4): 37-40 |
| |
| 作者姓名： | 王荣滨 |
| |
| 作者单位： | 南弯工具厂, |
| |
| 摘 要： | 本文研究了选用H1 3电渣钢制造高强度螺栓热镦开式模 ,经改锻—锻热固溶调质予处理—B·N复合渗强化处理 ,代替原 3Cr2W 8V钢制热镦开式模常规处理 ,消除了早中期失效 ,寿命提高 6倍以上 ,效益显著
|
| 关 键 词： | 电渣钢 热镦开式模 复合渗 H13钢 锻造模具 螺栓 选材 |
| 文章编号： | 1008-1690(2001)04-0037-04 |
| 修稿时间： | 2001-06-11 |
Material Selection of hot Forging open-die and Strengtnening Treatment of Complex Seeping |
| |
| WANG Rong-bin. Material Selection of hot Forging open-die and Strengtnening Treatment of Complex Seeping[J]. Heat Treatment, 2001, 16(4): 37-40 |
| |
| Authors: | WANG Rong-bin |
| |
| Abstract: | Selecting H13(ESR) to manufacture the high-strength bolt of hot compression open-die is researched,through which is forged,quenched and tempered pretreatment and B.N complex seep strengthening treatment.It replay the routine treatment of hot compression open-die which is manufactured by 3Cr2W8V and remove medium-early.-term abating.The longevity is improved six times upwards.Benefit is notability. |
| |
| Keywords: | H13(ESR) hot compression open-die B.N complex seep |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
