Electrochemical hydrogen storage characteristics of nanocrystalline and amorphous Mg20Ni10-xCox(x=0−4) alloys prepared by melt spinning |
| |
Authors: | Yang-huan Zhang Hui-ping Ren Bao-wei Li Shi-hai Guo Zai-guang Pang Xin-lin Wang |
| |
Affiliation: | 1. Department of Functional Material Research, Central Iron and Steel Research Institute, Beijing 100081, China;2. School of Material, Inner Mongolia University of Science and Technology, Baotou 014010, China |
| |
Abstract: | Nanocrystalline and amorphous Mg2Ni-type alloys with nominal compositions of Mg20Ni10-xCox (x = 0, 1, 2, 3, 4) were synthesized by melt-spinning technique. The microstructures of the as-cast and spun alloys were characterized by XRD, SEM and HRTEM. The electrochemical hydrogen storage characteristics of the as-cast and spun alloys were measured. The obtained results show that the substitution of Co for Ni does not change the major phase of Mg2Ni, but it leads to the formation of secondary phase MgCo2 and Mg. No amorphous phase forms in the as-spun alloy (x = 0), whereas the as-spun alloy (x = 4) holds a nanocrystalline and amorphous structure, confirming that the substitution of Co for Ni significantly heightens the glass forming ability of the Mg2Ni-type alloy. The substitution of Co for Ni and melt spinning significantly improve the electrochemical hydrogen storage performances of the alloys. When Co content x increases from 0 to 4, the maximum discharge capacity of the as-cast alloy increases from 30.3 to 113.3 mAh/g, and from 135.5 to 402.5 mAh/g for as-spun (30 m/s) alloy. The capacity retaining rate of the as-cast alloy after 20 cycles rises from 36.71 to 37.04%, and from 27.06 to 83.35% for as-spun (30 m/s) alloy, respectively. |
| |
Keywords: | Mg2Ni-type alloy Melt-spinning Structure Electrochemical hydrogen storage |
本文献已被 ScienceDirect 等数据库收录! |
|