| 汽车曲轴热加工表面开裂原因分析 |
| |
| 引用本文： | 孙捷,万明攀,何敏,王丽远. 汽车曲轴热加工表面开裂原因分析[J]. 机械工程材料, 2006, 30(9): 73-75 |
| |
| 作者姓名： | 孙捷 万明攀 何敏 王丽远 |
| |
| 作者单位： | 贵州大学材料科学与工程学院,贵州,贵阳,550003;贵州大学材料科学与工程学院,贵州,贵阳,550003;贵州大学材料科学与工程学院,贵州,贵阳,550003;贵州大学材料科学与工程学院,贵州,贵阳,550003 |
| |
| 摘 要： | 用电子探针X射线微区分析仪、金相检验等方法对42CrMo汽车曲轴生产过程中出现表面裂纹的原因进行了分析.结果表明：原材料中存在明显的异金属夹杂物和非金属夹杂物及晶界杂质偏聚是造成曲轴淬火表面开裂的主要原因.
|
| 关 键 词： | 42CrMo 曲轴 表面裂纹 夹杂物 |
| 文章编号： | 1000-3738（2006）09-0073-03 |
| 收稿时间： | 2005-08-22 |
| 修稿时间： | 2005-08-222005-11-25 |
Failure Analysis of Automobile Crankshaft Cracking in Heat-treatment |
| |
| SUN Jie,WAN Ming-pan,HE Min,WANG Li-yuan. Failure Analysis of Automobile Crankshaft Cracking in Heat-treatment[J]. Materials For Mechanical Engineering, 2006, 30(9): 73-75 |
| |
| Authors: | SUN Jie WAN Ming-pan HE Min WANG Li-yuan |
| |
| Affiliation: | Guizhou University, Guiyang 550003, China |
| |
| Abstract: | Failure analysis of the surface cracks of 42CrMo automobile crankshaft was performed with EMPA, EDS and metallographic examination. The results show that the apparent and non-metallic inclusions existing m the raw materials and segregation in the composition of grain-boundary were the reason why quench caused the cracking at the suriace of the crankshaft. |
| |
| Keywords: | 42CrMo |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
