Measurements of shear stress in a square array rod bundle

A flush-mounted hot film sensor was used to determine the shear stress distribution on the centrally located rod in a 1.4 pitch to diameter ratio square array, nine rod bundle with axial flow. The film sensor was calibrated in a concentric annulus flow geometry. Shear stress measurements were made at a position 65 hydraulic diameters from the flow entrance for Reynolds numbers from 12 000 to 32 000. The circumferential variation of the shear stress was nearly sinusoidal around the central rod and the maximum and minimum values occurred at the maximum and minimum subchannel spacing. The peak to peak variation of the sinusoidal shear stress distribution is about 4 to 6% of the mean value.