| 微电子封装中FeCl_3蚀刻液沉淀失效及再恢复 |
| |
| 引用本文： | 黄辉,黄乐,马莒生. 微电子封装中FeCl_3蚀刻液沉淀失效及再恢复[J]. 电子元件与材料, 2002, 21(7): 1-4 |
| |
| 作者姓名： | 黄辉 黄乐 马莒生 |
| |
| 作者单位： | 清华大学材料系电子材料与封装实验室,北京,100084 |
| |
| 基金项目： | 国家自然科学基金资助项目(69836030) |
| |
| 摘 要： | 在微电子封装中,多处要使用FeCl3溶液进行蚀刻,如PCB布线,细间距引线框架等。在实际湿法蚀刻的研究中,发现使用高玻美度的FeCl3溶液蚀刻效果好。而高玻美度溶液的低温结晶现象比低玻美度(40癇e)要明显得多,对科学研究和生产带来较大的不利。本文分析研究了FeCl3蚀刻液失效产物和产生机制,提出了失效的温度因素、杂质离子因素、时间因素的影响过程和再恢复的方法。
|
| 关 键 词： | 氯化铁溶液 高玻美度 沉淀失效 再恢复 |
| 文章编号： | 1001-2028(2002)07-0001-04 |
| 修稿时间： | 2002-03-07 |
The Research on Deposition Failure and Regeneration of FeCl3 Etchant in Microelectronics Packaging |
| |
| HUANG Hui,HUANG Le,MA Ju-sheng. The Research on Deposition Failure and Regeneration of FeCl3 Etchant in Microelectronics Packaging[J]. Electronic Components & Materials, 2002, 21(7): 1-4 |
| |
| Authors: | HUANG Hui HUANG Le MA Ju-sheng |
| |
| Abstract: | FeCl3 etchant solution is commonly used for etch materials in microelectronics packages, such as wire layout in PCB, fine pitch lead frame. It has been reported that high Baume FeCl3 solution is fairly effective. However, crystallization at low temperature is more obvious when high Baume (48癇e) FeCl3 solution being used than low Baume (40癇e) solution. The deposition failure mechanism of FeCl3 solution is analyzed. How temperature, impurity ion, time, etc cause the failure is discussed and a generation approach is proposed. |
| |
| Keywords: | FeCl3 solution high Baume deposition invalidation regeneration |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
