| 汽车下臂后吊耳外板侧冲孔模设计 |
| |
| 引用本文： | 马文涛,刘少贤.汽车下臂后吊耳外板侧冲孔模设计[J].模具工业,2012,38(7):34-36. |
| |
| 作者姓名： | 马文涛 刘少贤 |
| |
| 作者单位： | 保定市精工汽车模具技术有限公司,河北保定,071000 |
| |
| 摘 要： | 以某车型下臂后吊耳外板侧冲孔模设计为例,对其冲压工艺方案进行了分析,介绍了设计中应注意的事项,确定了最优的设计方案。生产实践证明,模具结构合理,降低了模具维修费用,生产的零件达到了客户的要求。
|
| 关 键 词： | 侧冲孔模 凸模强度 排料空间 |
Side piercing die for the hole punching on the outer panel of rear lifting bail of automobile arm |
| |
| MA Wen-tao
,
LIU Shao-xian.Side piercing die for the hole punching on the outer panel of rear lifting bail of automobile arm[J].Die & Mould Industry,2012,38(7):34-36. |
| |
| Authors: | MA Wen-tao LIU Shao-xian |
| |
| Affiliation: | (Baoding Exquisite Auto Mould Technology Co., Ltd, Baoding, Hebei 071000, China) |
| |
| Abstract: | Analysis was made on the stamping process and design of a side piercing die for the hole punching on the outer panel of rear lifting bail of an automobile arm. Some important design points were stated; and an optimized design plan and a manufacturing process were determined. |
| |
| Keywords: | side piercing die strength of punch space for material discharge |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
