| Abstract: | The use of renewable resources (mainly carbohydrates) in rigid polyurethane foam has been known to offer several advantages, such as increased strength, improved flame resistance, and enhanced biodegradability. Less attention has been directed to inexpensive protein‐based materials, such as defatted soy flour. The objectives of this study were to develop water‐blown rigid polyurethane foams, containing defatted soy flour, that have acceptable or improved physical properties which also lower the cost of the foam formulation and to compare the properties of developed foams extended with three kinds of commercial soy flour. Water‐blown low‐density rigid polyurethane foams were prepared with poly(ether polyol)s, polymeric isocyanates, defatted soy flour, water, a catalyst mixture, and a surfactant. Soy flour and the initial water content were varied from 0 to 40% and from 4.5 to 5.5% of the poly(ether polyol) content, respectively. A standard laboratory mixing procedure was followed for making foams using a high‐speed industrial mixer. After mixing, the mixture was poured into boxes and allowed to rise at ambient conditions. Foams were removed from boxes after 1 h and cured at room temperature for 24 h before measurement of the thermal conductivity and for 1 week before other property tests. Foam properties were determined according to ASTM procedures. Measurement of the physical properties (compressive strength, modulus, thermal conductivity, and dimensional stability under thermal and humid aging) of these foams showed that the addition of 10–20% of three kinds of soy flour imparted water‐blown rigid polyurethane foams with similar or improved strength, modulus, insulation, and dimensional stability. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 10–19, 2001 |
