大型低合金钢铸件炉喉钢砖的铸造工艺设计

低合金钢铸件炉喉钢砖,最大壁厚80 mm,最小壁厚50 mm,中间空腔大,属壁薄、大芯大型铸件。工艺设计方面木模采用容易起模的“抽芯模式”结构,造型上采用水玻璃砂、石灰石砂、树脂砂三种砂型配合使用,并在砂芯中放入干砂块以增加砂芯的退让性,正确设计浇注系统等,消除了铸件裂纹、缩孔、缩松等缺陷,成功地生产出尺寸精度、表面质量均符合要求的合格铸件,工艺出品率98%以上。

Casting Methoding for Large Low Alloy Steel Brick in Furnace Throat

Large low alloy steel furnace throat brick is a large housing casting with thickest wall section of 80mm and thin section of 50mm.Due to the difficulty of pattern stripping,water-glass sand,resin sand lime sand are used for mould;dry sand is put in core to increase its deformability;correct casting methoding is also necessary.Using the above technology defects like cracks,shrinkage hole and porosity rae elimited,quality castings are produced successfully with yield of 2%.