| 车轮轮辐拉伸模设计 |
| |
| 引用本文： | 赵华中. 车轮轮辐拉伸模设计[J]. 模具工业, 2000, 0(3): 15-16 |
| |
| 作者姓名： | 赵华中 |
| |
| 作者单位： | 安徽省客车总厂!安徽六安237052 |
| |
| 摘 要： | 以车轮轮辐拉伸模为例 ,介绍采用调质处理的刚性压边圈 ,并通过控制压边圈与凹模平面的间隙和减小凹模口圆角半径的方法 ,能够实现在普通压力机上直接拉伸 ,使制件质量稳定、操作简便 ,并降低了生产成本 ,提高了材料的利用率。
|
| 关 键 词： | 车轮 轮辐 拉伸模 刚性压边圈 |
| 修稿时间： | 1999-06-09 |
Designof the Drawing Die for the Wheel Spoke |
| |
| Zhao Huazhong et al. Designof the Drawing Die for the Wheel Spoke[J]. Die & Mould Industry, 2000, 0(3): 15-16 |
| |
| Authors: | Zhao Huazhong et al |
| |
| Abstract: | Taking the drawing die for the wheel spoke as an example, a method by adopting the rigid blank_holding ring after refining treatment, and by controlling the clearance between the blank_holding ring and the matrix surface and reducing the curvature radium of the matrix mouth was introduced. Drawing parts can be drawn directly on common pressing machines with simple operation and stable quality, thus the production cost is lowered and the material utilization ratio enhanced. |
| |
| Keywords: | wheel spoke drawing die rigid blank_holding ring |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
