In situ TiBX/TiXNiY/TiC reinforced Ni60 composites by laser cladding and its effect on the tribological properties

Ni-based composite coatings reinforced by TiB_X/Ti_XNi_Y/TiC with different Ti6Al4V contents were precipitated on a 35CrMoV substrate via laser cladding. The phase composition, elemental distribution, and precipitated phases of the coatings were characterised using X-ray diffraction, energy dispersive X-ray spectroscopy, scanning electron microscopy, and transmission electron microscopy. The mechanical and tribological properties of the cladding layer were also characterised. The results showed that the coating contained TiB₂, TiC, TiB, Ni₃Ti, and NiTi₂ phases with uniform elemental distribution and grain refinement. A schematic of the growth model and precipitation sequence of the reinforced phases was generated. The microstructure, elemental segregation, hardness, and friction behaviour of the cladding layer were significantly influenced by the addition of Ti6Al4V. The optimal microstructure and best mechanical properties were obtained by the addition of 4 wt% Ti6Al4V, with that coating possessing a hardness, average friction coefficient, and wear volume of 770.8 HV₁, 0.180 and 6132 um³, respectively.