| 火炮身管膛线数控加工的可靠性算法 |
| |
| 引用本文： | 魏书恒,李杰,刘梅梅,朱同兴.火炮身管膛线数控加工的可靠性算法[J].兵工自动化,2006,25(6):29-30. |
| |
| 作者姓名： | 魏书恒 李杰 刘梅梅 朱同兴 |
| |
| 作者单位： | 中国兵器工业第五八研究所,数控部,四川,绵阳,621000;中国兵器工业第五八研究所,数控部,四川,绵阳,621000;中国兵器工业第五八研究所,数控部,四川,绵阳,621000;中国兵器工业第五八研究所,数控部,四川,绵阳,621000 |
| |
| 基金项目： | 高比容电子铝箔的研究开发与应用项目 |
| |
| 摘 要： | 火炮身管膛线数控加工的可靠性算法,其系统软件先读取C轴插补中间状态寄存器、C轴给定值寄存器和Z轴反馈值寄存器之值.再计算并判断刀具实际与理论运动轨迹的等式成立与否,由此判断硬件插补器工作是否正常.从而保证拉刀运动轨迹的正确性和可重复性,确保膛线加工的可靠性.
|
| 关 键 词： | 身管膛线 寄存器 插补 给定值 反馈值 硬件插补器 |
| 文章编号： | 1006-1576（2006）06-0029-02 |
| 收稿时间： | 2006-01-23 |
| 修稿时间： | 2006-02-06 |
Reliability Algorithm in NC Process of Artillery Pipe's Rifling |
| |
| WEI Shu-heng,LI Jie,LIU Mei-mei,ZHU Tong-xing.Reliability Algorithm in NC Process of Artillery Pipe's Rifling[J].Ordnance Industry Automation,2006,25(6):29-30. |
| |
| Authors: | WEI Shu-heng LI Jie LIU Mei-mei ZHU Tong-xing |
| |
| Affiliation: | Dept. of Numerical Control, No. 58 Research Institute of China Ordnance Industries, Mianyang 621000, China |
| |
| Abstract: | At first, the system software of reliability algorithm read the value from interpolation mediacy register, theoretical register of c axis, and feedback register of z axis in NC processing of artillery rifling. At second, the system make use of the values to calculate the equations about actual trochoid and academic trochoid of cutter moving and deduce whether the hardware interpolation component executing normally or not. In order to keep the reliability of rifling processing, the validity and iteration of broach moving track are made sure before processing. |
| |
| Keywords: | Pipe rifling Register Interpolation Given value Feedback value Hardware interpolation component |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
