| 双轴双偏心滚切式定尺剪机构参数的研究 |
| |
| 引用本文： | 张礼明,秦勤,臧勇,刘静波.双轴双偏心滚切式定尺剪机构参数的研究[J].机械设计,2009,26(10). |
| |
| 作者姓名： | 张礼明 秦勤 臧勇 刘静波 |
| |
| 作者单位： | 1. 北京科技大学,机械工程学院,北京,100083
2. 一重集团大连设计研究院,辽宁,大连,116600 |
| |
| 摘 要： | 利用ADAMS软件建立了双轴双偏心滚切式定尺剪机构的参数化模型。依次分析了曲柄长度、曲柄初始相位角、导向连杆长度和机架铰接位置对剪刃重叠量和剪切力的影响规律,为该机构的设计开发提供了有效合理的计算方法。利用文中的方法在开发3800滚切式定尺剪时取得了很好的效果,证明了该方法正确有效。
|
| 关 键 词： | 滚切剪 机构参数 剪切力 |
Research on parameters of double axle double eccentricity roll cutting typed cut to length shearing machine |
| |
| ZHANG Li-ming,QIN Qin,ZANG Yong,LIU Jing-bo.Research on parameters of double axle double eccentricity roll cutting typed cut to length shearing machine[J].Journal of Machine Design,2009,26(10). |
| |
| Authors: | ZHANG Li-ming QIN Qin ZANG Yong LIU Jing-bo |
| |
| Affiliation: | 1.School of Mechanical Engineering;University of Science and Technology Beijing;Beijing 100083;China;2.Design Institute of China First Heavy Machinery Group Corporation;Dalian 116600;China |
| |
| Abstract: | The parameterized model of double axle double eccentricity roll cutting typed cut to length shearing machine was established by the use of ADAMS software.The influencing rules of crank length,primary phase angle of crank,length of guiding link and articulation position of machine frame on overlapping quantity of cutting edge and cutting force were successively analyzed.Effective and reasonable computing method for the design and development of this mechanism was provided.Very good effect has been obtained w... |
| |
| Keywords: | roll cutting shear parameters of mechanism shearing force |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
