| 冷轧高纯铝箔初始织构对再结晶织构的影响 |
| |
| 引用本文： | 路全彬,关绍康,卢广玺,朱金水,贺军超.冷轧高纯铝箔初始织构对再结晶织构的影响[J].轻合金加工技术,2011,39(12). |
| |
| 作者姓名： | 路全彬 关绍康 卢广玺 朱金水 贺军超 |
| |
| 作者单位： | 郑州大学材料科学与工程学院,河南郑州,450002 |
| |
| 基金项目： | 河南省重大公益科研项目(HNZB[2009]N) |
| |
| 摘 要： | 高压箔经过多道次冷轧后,形成类型复杂的织构。本试验应用X射线衍射仪测定铝箔织构,定量研究了冷轧高纯铝箔常见初始织构与再结晶织构的关系。结果表明,当初始织构为高含量的S织构{123}<634>、铜织构{112}<111>和约10%的立方织构{100}<001>,较少的旋转立方{001}<110>、黄铜织构{011}<211>时,再结晶退火后立方织构含量最高。由于S织构与立方织构存在40°<111>关系,在退火过程中有利于形成立方织构。
|
| 关 键 词： | X射线衍射 高压箔 再结晶织构 退火 |
Influence of initial texture on re-crystallization texture of cold rolled high purity aluminum foil |
| |
| LU Quan-bin,GUAN Shao-kang,LU Guang-xi,ZHU Jin-shui,HE Jun-chao.Influence of initial texture on re-crystallization texture of cold rolled high purity aluminum foil[J].Light Alloy Fabrication Technology,2011,39(12). |
| |
| Authors: | LU Quan-bin GUAN Shao-kang LU Guang-xi ZHU Jin-shui HE Jun-chao |
| |
| Affiliation: | LU Quan-bin,GUAN Shao-kang,LU Guang-xi,ZHU Jin-shui,HE Jun-chao(School of Materials Science and Engineering,Zhengzhou University,Zhengzhou 450002,China) |
| |
| Abstract: | The aluminum alloy foil used as high voltage anode is cold rolled through multi-passes,so the complex textures are being formed.The aluminum foil texture has been measured,and the influence of initial texture of the high pure aluminum alloy on the re-crystallization texture of the foil has been investigated by XRD and its quantitative analysis has been made.The results show that the cubic texture keeps the highest portion after annealing,while the initial textures possess high content of S texture {123} <63... |
| |
| Keywords: | X-ray diffraction high voltage anode aluminum foil re-crystallization texture annealing |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
