| 气动轴承板形仪测量原理与应用 |
| |
| 引用本文： | 郝亮,邸洪双,龚殿尧,薛文林,雷银娥.气动轴承板形仪测量原理与应用[J].轻合金加工技术,2011,39(12). |
| |
| 作者姓名： | 郝亮 邸洪双 龚殿尧 薛文林 雷银娥 |
| |
| 作者单位： | 1. 东北大学轧制技术及连轧自动化国家重点实验室,辽宁沈阳,110004
2. 江苏苏铝有限公司,江苏徐州,221007 |
| |
| 基金项目： | 国家重点基础研究发展规划项目(2006CB605208-1); 青年教师科研启动基金N100307001 |
| |
| 摘 要： | 板形仪是板形控制系统的重要组成部分,它的准确性直接关系到实际板形控制效果。研究了1550单机架四辊不可逆箔材轧机气动轴承板形仪测量原理和信号处理方法。通过对电信号进行插值、平滑处理,再根据板形仪测量辊径向载荷与箔材平直度测关系得到箔材平直度测量值。该板形仪在实际生产过程中应用取得良好的效果。
|
| 关 键 词： | 箔材轧制 气动轴承板形仪 测量原理 信号处理 |
Working principle and application of air bearing shape meter |
| |
| HAO Liang,DI Hong-shuang,GONG Dian-yao,XUE Wen-lin,LEI Yin-e.Working principle and application of air bearing shape meter[J].Light Alloy Fabrication Technology,2011,39(12). |
| |
| Authors: | HAO Liang DI Hong-shuang GONG Dian-yao XUE Wen-lin LEI Yin-e |
| |
| Affiliation: | HAO Liang1,DI Hong-shuang1,GONG Dian-yao1,XUE Wen-lin2,LEI Yin-e2(1.State Key Lab of Rolling Technology and Automation,Northeast University,Shenyang 110004,China,2.Jiangsu Sulu Aluminum Co.Ltd.,Xuzhou 221055,Jiangsu,China) |
| |
| Abstract: | Shape meter is the important unit in the flatness control system.Its accuracy can affect flatness of rolling products at the working line.The working principle of air bearing shape meter and signal processing method of the 1550 four-high irreversible single cold foil rolling mill have been investigated.The flatness measuring value has been obtained by interpolation value,electrical signal smooth processing and the calculated flatness value received from the relationship of radial direction load on measuring... |
| |
| Keywords: | foil rolling air bearing shape meter measuring principle signal processing |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
