首页 | 本学科首页   官方微博 | 高级检索  
     

多轴汽车平顺性的柔性模型研究
引用本文:杨波,王学林,胡于进,李成刚. 多轴汽车平顺性的柔性模型研究[J]. 机械工程学报, 2003, 39(12): 145-150
作者姓名:杨波  王学林  胡于进  李成刚
作者单位:华中科技大学机械设计系
基金项目:“九五”国防预研课题(A968601-02)
摘    要:为了分析多轴汽车悬挂质量的弯曲振动对整车平顺性的影响,运用弹性梁弯曲振动理论和模态分析法建立了多轴汽车平顺性分析的柔性模型。用所提出的模型对多轴汽车整车平顺性进行了仿真研究,分析结果表明刚体模型不适合用于多轴汽车平顺性的分析。同时,进行了某五轴重型车的道路行驶试验,通过在不同车速下的仿真结果与道路行驶试验结果的比较,证明了所提出的平顺性分析建模方法和模型是可行的。

关 键 词:多轴  平顺性  汽车  柔性模型  
修稿时间:2002-10-17

FLEXIBLE MODEL OF MULTI-AXLE VEHICLE RIDE COMFORT
Yang Bo Wang Xuelin Hu Yujin Li Chenggang. FLEXIBLE MODEL OF MULTI-AXLE VEHICLE RIDE COMFORT[J]. Chinese Journal of Mechanical Engineering, 2003, 39(12): 145-150
Authors:Yang Bo Wang Xuelin Hu Yujin Li Chenggang
Affiliation:Huazhong University of Science and Technology
Abstract:In order to consider the influence of the bending vibrations of sprung mass to multi-axle vehicle ride comfort. A flexible model of multi-axle vehicle ride comfort is presented by combining the vibration theory of elastic beam and modal analysis method. According to assessment method of vehicle ride comfort the whole vehicle ride comfort is simulated with the model presented. The simulation results show that the rigid model is not acceptable for multi-axle vehicle. At the same time, the road running test of a five axle heavy vehicle is carried out. The modeling approach and the flexible model of ride comfort presented are proved to be feasible by the compare between simulation results with test results at different speeds.
Keywords:Multi-axle Vehicle Ride comfort Flexible model
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《机械工程学报》浏览原始摘要信息
点击此处可从《机械工程学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号